For Windows-related and other problems, see www.winsteps.com/problems.htm
Winsteps functions under Windows 10, 8, 7, Vista, but not Windows XP or earlier.
Error codes are reported by Winsteps for which no automatic action is possible.
W1 |
Winsteps expects its input files to be in MS-DOS text file format, i.e., readable by a text editor such as NotePad. If in doubt, 1. Open the Winsteps file in Microsoft Word (or equivalent) 2. "Save As" either: "Text with line breaks" or: "Plain Text", "MS-DOS" |
|
Is this a Text file with line breaks? Variable=Value expected here: ... |
The file is not in standard "text" file format. This can be reported for files created on a Mac. |
|
{\rtf1\.... |
Your control file is in RTF, not TXT format. |
|
ÿþ |
Your control file is in Unicode, not ANSI coding. |
|
þÿ |
Your control file is in Unicode Bigendian, not ANSI coding. |
|
 |
Your control file is in UTF-8 coding. |
|
W2 |
UNRECOGNIZED VARIABLE (CHECK SPELLING): Facets = 3 |
This can occur when a Facets specification file is submitted to Winsteps. |
Warning: IGNORED (too long): |
The control-variable value is too long. The usable characters are actioned. The excess characters are ignored. |
|
W4 |
Oops! Item labels = ..., but NI=...4 |
The count of item labels between &END and END LABELS does not match the number of items. The analysis is done, but the item labels in the Output Tables may be incorrect. |
W5 |
Oops! Use "Edit" menu to make corrections, then restart |
There is a problem with your Winsteps control file, or your Extra Specifications. Use the Winsteps "Edit" menu to make corrections, and then the "File" menu to "Exit and Restart" your analysis. |
NI=1. Two or more items required. |
Responses to more than one item are required in order to construct additive measures from ordinal data |
|
Only one person. Two or more persons required |
Responses by more than one person are required in order to construct additive measures from ordinal data |
|
No non-extreme persons/items, see RFILE= or CODES= may not match the data |
All the data have been eliminated as extreme. Please verify that the control instructions match the data. See also Guttman data. |
|
W12 |
TEMPORARY DELETED item. MATCHING person SUMMARY STATISTICS NOT AVAILABLE. |
when you delete or deselect an item after the main analysis, then the person measures and fit statistics change. These need to be re-estimated, so another run of Winsteps is required. You can do this with Winsteps "File" menu, "Restart yourfilename.txt", and then enter the item delete/deselect instruction at the "Extra Specifications?" prompt. |
W13 |
TEMPORARY DELETED person. MATCHING item SUMMARY STATISTICS NOT AVAILABLE. |
when you delete or deselect a person after the main analysis, then all item measures and fit statistics change. These need to be re-estimated, so another run of Winsteps is required. You can do this with Winsteps "File" menu, "Restart yourfilename.txt", and then enter the person delete/deselect instruction at the "Extra Specifications?" prompt. |
W14 |
Invalid line in PLFILE= (number extraction failed, code ... ) of .... |
PLFILE= lines must start with person entry number, or first-last entry numbers, followed by person label. These numbers can be computed from a valid arithmetic formula, e.g., 2*4+7 |
W15 |
Invalid line in EDFILE= (.... |
Please see EDFILE= for description of correct line formats |
W16 |
Unknown Command on DOS prompt line |
Usually Winsteps controlfile outputfile variable=value, but other formats are allowed, see BATCH= |
W17 |
... bytes of memory not available, File/Table not produced. |
Winsteps can access up to 1.8GB of RAM memory for data, if this is available. See "not enough memory" |
W18 |
... bytes of memory not available, using disk work file ... |
Winsteps is using disk instead of RAM. Processing will be slower. |
Typical error report on your Winsteps analysis window:
Windows Error Codes: |
|
-2 |
Use File Menu to add a BLANK LINE at end of file |
-1 |
End of file has been reached unexpectedly. |
0 |
Error not detected. Processing has stopped itself. |
1 |
Incorrect function. Contact winsteps.com |
1AD |
ActiveX component can't create object. See www.winsteps.com/problems.htm |
2 |
The system cannot find the file specified. |
3 |
The system cannot find the path or directory specified. See www.winsteps.com/problems.htm |
4 |
The system cannot open the file. |
5 |
Access is denied. See www.winsteps.com/problems.htm |
6 |
The handle is invalid. |
7 |
The storage control blocks were destroyed. |
8 |
Not enough storage is available to process this command. |
9 |
The storage control block address is invalid. |
10 |
The environment is incorrect. |
11 |
An attempt was made to load a program with an incorrect format. |
12 |
The access code is invalid. |
13 |
The data is invalid. |
13 |
Type Mismatch. Example: Excel-related error in WINEXCEL ... ; 13 Type mismatch Windows XP 2.5.1 - Excel 10.0 Early versions of Excel are not compatible with the current version of Winsteps. Contact www.winsteps.com for help. |
14 |
Not enough storage is available to complete this operation. |
15 |
The system cannot find the drive specified. |
16 |
The directory cannot be removed. |
17 |
The system cannot move the file to a different disk drive. |
18 |
There are no more files. |
19 |
The media is write protected. |
20 |
The system cannot find the specified device. |
21 |
The device is not ready. |
22 |
The device does not recognize the command. |
23 |
Data error (cyclic redundancy check). |
24 |
The program issued a command but the command length is incorrect. |
25 |
The drive cannot locate a specific area or track on the disk. |
26 |
The specified disk or diskette cannot be accessed. |
27 |
The drive cannot find the sector requested. |
28 |
The printer is out of paper. |
29 |
The system cannot write to the specified device. |
30 |
The system cannot read from the specified device. |
31 |
A device attached to the system is not functioning. |
32 |
The process cannot access the file because it is being used by another process. |
33 |
The process cannot access the file because another process has locked a portion of the file. |
34 |
The wrong diskette is in the drive. |
36 |
Too many files opened for sharing. |
38 |
Reached the end of the file. |
39 |
The disk is full. |
50 |
The network request is not supported. |
51 |
The remote computer is not available. |
52 |
A duplicate name exists on the network. |
53 |
The network path was not found. |
54 |
The network is busy. |
55 |
The specified network resource or device is no longer available. |
56 |
The network BIOS command limit has been reached. |
57 |
A network adapter hardware error occurred. |
58 |
The specified server cannot perform the requested operation. |
59 |
An unexpected network error occurred. |
60 |
The remote adapter is not compatible. |
61 |
The printer queue is full. |
62 |
Space to store the file waiting to be printed is not available on the server. |
63 |
Your file waiting to be printed was deleted. |
64 |
The specified network name is no longer available. |
65 |
Network access is denied. |
66 |
The network resource type is not correct. |
67 |
The network name cannot be found. |
68 |
The name limit for the local computer network adapter card was exceeded. |
69 |
The network BIOS session limit was exceeded. |
70 |
The remote server has been paused or is in the process of being started. |
71 |
Remote computer can accept no more connections. |
72 |
The specified printer or disk device has been paused. |
80 |
The file exists. |
82 |
The directory or file cannot be created. |
83 |
Fail on interrupt 24 handler. |
84 |
Storage to process this request is not available. |
85 |
The local device name is already in use. |
86 |
The specified network password is not correct. |
87 |
The parameter is incorrect. |
88 |
A write fault occurred on the network. |
89 |
The system cannot start another process at this time. |
100 |
Cannot create another system semaphore. |
101 |
The exclusive semaphore is owned by another process. |
102 |
The semaphore is set and cannot be closed. |
103 |
The semaphore cannot be set again. |
104 |
Cannot request exclusive semaphores at interrupt time. |
105 |
The previous ownership of this semaphore has ended. |
106 |
Insert the diskette for drive %1. |
107 |
The program stopped because an alternate diskette was not inserted. |
108 |
The disk is in use or locked by another process. |
109 |
The pipe has been ended. |
110 |
The system cannot open the device or file specified. |
111 |
The file name is too long. |
112 |
There is not enough space on the disk. |
113 |
No more internal file identifiers available. |
114 |
The target internal file identifier is incorrect. |
117 |
The IOCTL call made by the application program is not correct. |
118 |
The verify-on-write switch parameter value is not correct. |
119 |
The system does not support the command requested. |
120 |
This function is not valid on this platform. |
121 |
The semaphore time-out period has expired. |
122 |
The data area passed to a system call is too small. |
123 |
The file name, directory name, or volume label syntax is incorrect. |
124 |
The system call level is not correct. |
125 |
The disk has no volume label. |
126 |
The specified module could not be found. |
127 |
The specified procedure could not be found. |
128 |
There are no child processes to wait for. |
129 |
The %1 application cannot be run in Windows NT mode. |
130 |
Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O. |
131 |
An attempt was made to move the file pointer before the beginning of the file. Can also happen when trying to write a file bigger than file-system limits. |
132 |
The file pointer cannot be set on the specified device or file. |
133 |
A JOIN or SUBST command cannot be used for a drive that contains previously joined drives. |
134 |
An attempt was made to use a JOIN or SUBST command on a drive that has already been joined. |
135 |
An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted. |
136 |
The system tried to delete the JOIN of a drive that is not joined. |
137 |
The system tried to delete the substitution of a drive that is not substituted. |
138 |
The system tried to join a drive to a directory on a joined drive. |
139 |
The system tried to substitute a drive to a directory on a substituted drive. |
140 |
The system tried to join a drive to a directory on a substituted drive. |
141 |
The system tried to SUBST a drive to a directory on a joined drive. |
142 |
The system cannot perform a JOIN or SUBST at this time. |
143 |
The system cannot join or substitute a drive to or for a directory on the same drive. |
144 |
The directory is not a sub-directory of the root directory. |
145 |
The directory is not empty. |
146 |
The path specified is being used in a substitute. |
147 |
Not enough resources are available to process this command. |
148 |
The path specified cannot be used at this time. |
149 |
An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. |
150 |
System trace information was not specified in your Config.sys file, or tracing is disallowed. |
151 |
The number of specified semaphore events for DosMuxSemWait is not correct. |
152 |
DosMuxSemWait did not execute; too many semaphores are already set. |
153 |
The DosMuxSemWait list is not correct. |
154 |
The volume label you entered exceeds the label character limit of the target file system. |
155 |
Cannot create another thread. |
156 |
The recipient process has refused the signal. |
157 |
The segment is already discarded and cannot be locked. |
158 |
The segment is already unlocked. |
159 |
The address for the thread identifier is not correct. |
160 |
The argument string passed to DosExecPgm is not correct. |
161 |
The specified path is invalid. |
162 |
A signal is already pending. |
164 |
No more threads can be created in the system. |
167 |
Unable to lock a region of a file. |
170 |
The requested resource is in use. |
173 |
A lock request was not outstanding for the supplied cancel region. |
174 |
The file system does not support atomic changes to the lock type. |
180 |
The system detected a segment number that was not correct. |
182 |
The operating system cannot run %1. |
183 |
Cannot create a file when that file already exists. |
186 |
The flag passed is not correct. |
187 |
The specified system semaphore name was not found. |
188 |
The operating system cannot run %1. |
189 |
The operating system cannot run %1. |
190 |
The operating system cannot run %1. |
191 |
Cannot run %1 in Windows NT mode. |
192 |
The operating system cannot run %1. |
193 |
Is not a valid application. |
194 |
The operating system cannot run %1. |
195 |
The operating system cannot run %1. |
196 |
The operating system cannot run this application program. |
197 |
The operating system is not presently configured to run this application. |
198 |
The operating system cannot run %1. |
199 |
The operating system cannot run this application program. |
200 |
The code segment cannot be greater than or equal to 64 KB. |
201 |
The operating system cannot run %1. |
202 |
The operating system cannot run %1. |
203 |
The system could not find the environment option that was entered. |
205 |
No process in the command sub-tree has a signal handler. |
206 |
The file name or extension is too long. |
207 |
The ring 2 stack is in use. |
208 |
The global file name characters, "*" or "?," are entered incorrectly or too many global file name characters are specified. |
209 |
The signal being posted is not correct. |
210 |
The signal handler cannot be set. |
212 |
The segment is locked and cannot be reallocated. |
214 |
Too many dynamic-link modules are attached to this program or dynamic-link module. |
215 |
Cannot nest calls to the LoadModule function. |
216 |
The image file %1 is valid, but is for a machine type other than the current machine. |
230 |
The pipe state is invalid. |
231 |
All pipe instances are busy. |
232 |
The pipe is being closed. |
233 |
No process is on the other end of the pipe. |
234 |
More data is available. |
240 |
The session was canceled. |
254 |
The specified extended attribute name was invalid. |
255 |
The extended attributes are inconsistent. |
259 |
No more data is available. |
266 |
The copy functions cannot be used. |
267 |
The directory name is invalid. |
275 |
The extended attributes did not fit in the buffer. |
276 |
The extended attribute file on the mounted file system is corrupt. |
277 |
The extended attribute table file is full. |
278 |
The specified extended attribute handle is invalid. |
282 |
The mounted file system does not support extended attributes. |
288 |
Attempt to release mutex not owned by caller. |
298 |
Too many posts were made to a semaphore. |
299 |
Only part of a ReadProcessMemory or WriteProcessMemory request was completed. |
317 |
The system cannot find message text for message number 0x%1 in the message file for %2. |
429 |
ActiveX component can't create object. See www.winsteps.com/problems.htm |
487 |
Attempt to access invalid address. |
534 |
Arithmetic result exceeded 32 bits. |
535 |
There is a process on other end of the pipe. |
536 |
Waiting for a process to open the other end of the pipe. |
994 |
Access to the extended attribute was denied. |
995 |
The I/O operation has been aborted because of either a thread exit or an application request. |
996 |
Overlapped I/O event is not in a signaled state. |
997 |
Overlapped I/O operation is in progress. |
998 |
Invalid access to memory location. |
999 |
Error performing inpage operation. |
1001 |
Recursion too deep; the stack overflowed. |
1002 |
The window cannot act on the sent message. |
1003 |
Cannot complete this function. |
1004 |
Invalid flags. |
1005 |
The volume does not contain a recognized file system. |
1006 |
The volume for a file has been externally altered so that the opened file is no longer valid. |
1007 |
The requested operation cannot be performed in full-screen mode. |
1008 |
An attempt was made to reference a token that does not exist. |
1009 |
The configuration registry database is corrupt. |
1010 |
The configuration registry key is invalid. |
1011 |
The configuration registry key could not be opened. |
1012 |
The configuration registry key could not be read. |
1013 |
The configuration registry key could not be written. |
1014 |
One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful. |
1015 |
The registry is corrupted. |
1016 |
An I/O operation initiated by the registry failed unrecoverably. |
1017 |
The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format. |
1018 |
Illegal operation attempted on a registry key that has been marked for deletion. |
1019 |
System could not allocate the required space in a registry log. |
1020 |
Cannot create a symbolic link in a registry key that already has sub-keys or values. |
1021 |
Cannot create a stable sub-key under a volatile parent key. |
1022 |
A notify change request is being completed and the information is not being returned in the caller's buffer. |
1051 |
A stop control has been sent to a service that other running services are dependent on. |
1052 |
The requested control is not valid for this service. |
1053 |
The service did not respond to the start or control request in a timely fashion. |
1054 |
A thread could not be created for the service. |
1055 |
The service database is locked. |
1056 |
An instance of the service is already running. |
1057 |
The account name is invalid or does not exist. |
1058 |
The specified service is disabled and cannot be started. |
1059 |
Circular service dependency was specified. |
1060 |
The specified service does not exist as an installed service. |
1061 |
The service cannot accept control messages at this time. |
1062 |
The service has not been started. |
1063 |
The service process could not connect to the service controller. |
1064 |
An exception occurred in the service when handling the control request. |
1065 |
The database specified does not exist. |
1066 |
The service has returned a service-specific error code. |
1067 |
The process terminated unexpectedly. |
1068 |
The dependency service or group failed to start. |
1069 |
The service did not start due to a logon failure. |
1070 |
After starting, the service hung in a start-pending state. |
1071 |
The specified service database lock is invalid. |
1072 |
The specified service has been marked for deletion. |
1073 |
The specified service already exists. |
1074 |
The system is currently running with the last-known-good configuration. |
1075 |
The dependency service does not exist or has been marked for deletion. |
1076 |
The current boot has already been accepted for use as the last-known-good control set. |
1077 |
No attempts to start the service have been made since the last boot. |
1078 |
The name is already in use as either a service name or a service display name. |
1079 |
The account specified for this service is different from the account specified for other services running in the same process. |
1100 |
The physical end of the tape has been reached. |
1101 |
A tape access reached a file-mark. |
1102 |
The beginning of the tape or partition was encountered. |
1103 |
A tape access reached the end of a set of files. |
1104 |
No more data is on the tape. |
1105 |
Tape could not be partitioned. |
1106 |
When accessing a new tape of a multi-volume partition, the current block size is incorrect. |
1107 |
Tape partition information could not be found when loading a tape. |
1108 |
Unable to lock the media eject mechanism. |
1109 |
Unable to unload the media. |
1110 |
The media in the drive may have changed. |
1111 |
The I/O bus was reset. |
1112 |
No media in drive. |
1113 |
No mapping for the Unicode character exists in the target multi-byte code page. |
1114 |
A dynamic link library (DLL) initialization routine failed. |
1115 |
A system shutdown is in progress. |
1116 |
Unable to abort the system shutdown because no shutdown was in progress. |
1117 |
The request could not be performed because of an I/O device error. |
1118 |
No serial device was successfully initialized. The serial driver will unload. |
1119 |
Unable to open a device that was sharing an interrupt request (IRQ) with other devices. |
1120 |
A serial I/O operation was completed by another write to the serial port. |
1121 |
A serial I/O operation completed because the time-out period expired. |
1122 |
No identifier address mark was found on the floppy disk. |
1123 |
Mismatch between the floppy disk sector identifier field and the floppy disk controller track address. |
1124 |
The floppy disk controller reported an error that is not recognized by the floppy disk driver. |
1125 |
The floppy disk controller returned inconsistent results in its registers. |
1126 |
While accessing the hard disk, a recalibrate operation failed, even after retries. |
1127 |
While accessing the hard disk, a disk operation failed even after retries. |
1128 |
While accessing the hard disk, a disk controller reset was needed, but even that failed. |
1129 |
Physical end of tape encountered. |
1130 |
Not enough server storage is available to process this command. |
1131 |
A potential deadlock condition has been detected. |
1132 |
The base address or the file offset specified does not have the proper alignment. |
1140 |
An attempt to change the system power state was vetoed by another application or driver. |
1141 |
The basic input/output system (BIOS) failed an attempt to change the system power state. |
1142 |
An attempt was made to create more links on a file than the file system supports. |
1150 |
The specified program requires a newer version of Windows. |
1151 |
The specified program is not a Windows or MS-DOS program. |
1152 |
Cannot start more than one instance of the specified program. |
1153 |
The specified program was written for an earlier version of Windows. |
1154 |
One of the library files needed to run this application is damaged. |
1155 |
No application is associated with the specified file for this operation. |
1156 |
An error occurred in sending the command to the application. |
1157 |
One of the library files needed to run this application cannot be found. |
1200 |
The specified device name is invalid. |
1201 |
The device is not currently connected but it is a remembered connection. |
1202 |
An attempt was made to remember a device that had previously been remembered. |
1203 |
No network provider accepted the given network path. |
1204 |
The specified network provider name is invalid. |
1205 |
Unable to open the network connection profile. |
1206 |
The network connection profile is corrupt. |
1207 |
Cannot enumerate a non-container. |
1208 |
An extended error has occurred. |
1209 |
The format of the specified group name is invalid. |
1210 |
The format of the specified computer name is invalid. |
1211 |
The format of the specified event name is invalid. |
1212 |
The format of the specified domain name is invalid. |
1213 |
The format of the specified service name is invalid. |
1214 |
The format of the specified network name is invalid. |
1215 |
The format of the specified share name is invalid. |
1216 |
The format of the specified password is invalid. |
1217 |
The format of the specified message name is invalid. |
1218 |
The format of the specified message destination is invalid. |
1219 |
The credentials supplied conflict with an existing set of credentials. |
1220 |
An attempt was made to establish a session to a network server, but there are already too many sessions established to that server. |
1221 |
The work-group or domain name is already in use by another computer on the network. |
1222 |
The network is not present or not started. |
1223 |
The operation was canceled by the user. |
1224 |
The requested operation cannot be performed on a file with a user-mapped section open. |
1225 |
The remote system refused the network connection. |
1226 |
The network connection was gracefully closed. |
1227 |
The network transport endpoint already has an address associated with it. |
1228 |
An address has not yet been associated with the network endpoint. |
1229 |
An operation was attempted on a nonexistent network connection. |
1230 |
An invalid operation was attempted on an active network connection. |
1231 |
The remote network is not reachable by the transport. |
1232 |
The remote system is not reachable by the transport. |
1233 |
The remote system does not support the transport protocol. |
1234 |
No service is operating at the destination network endpoint on the remote system. |
1235 |
The request was aborted. |
1236 |
The network connection was aborted by the local system. |
1237 |
The operation could not be completed. A retry should be performed. |
1238 |
A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached. |
1239 |
Attempting to log in during an unauthorized time of day for this account. |
1240 |
The account is not authorized to log in from this station. |
1241 |
The network address could not be used for the operation requested. |
1242 |
The service is already registered. |
1243 |
The specified service does not exist. |
1244 |
The operation being requested was not performed because the user has not been authenticated. |
1245 |
The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist. |
1246 |
Caller to continue with work in progress. |
1247 |
An attempt was made to perform an initialization operation when initialization has already been completed. |
1248 |
No more local devices. |
1300 |
Not all privileges referenced are assigned to the caller. |
1301 |
Some mapping between account names and security IDs was not done. |
1302 |
No system quota limits are specifically set for this account. |
1303 |
No encryption key is available. A well-known encryption key was returned. |
1304 |
The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a null string. |
1305 |
The revision level is unknown. |
1306 |
Indicates two revision levels are incompatible. |
1307 |
This security identifier may not be assigned as the owner of this object. |
1308 |
This security identifier may not be assigned as the primary group of an object. |
1309 |
An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client. |
1310 |
The group cannot be disabled. |
1311 |
There are currently no logon servers available to service the logon request. |
1312 |
A specified logon session does not exist. It may already have been terminated. |
1313 |
A specified privilege does not exist. |
1314 |
A required privilege is not held by the client. |
1315 |
The name provided is not a properly formed account name. |
1316 |
The specified user already exists. |
1317 |
The specified user does not exist. |
1318 |
The specified group already exists. |
1319 |
The specified group does not exist. |
1320 |
Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member. |
1321 |
The specified user account is not a member of the specified group account. |
1322 |
The last remaining administration account cannot be disabled or deleted. |
1323 |
Unable to update the password. The value provided as the current password is incorrect. |
1324 |
Unable to update the password. The value provided for the new password contains values that are not allowed in passwords. |
1325 |
Unable to update the password because a password update rule has been violated. |
1326 |
Logon failure-unknown user name or bad password. |
1327 |
Logon failure-user account restriction. |
1328 |
Logon failure-account logon time restriction violation. |
1329 |
Logon failure-user not allowed to log on to this computer. |
1330 |
Logon failure-the specified account password has expired. |
1331 |
Logon failure-account currently disabled. |
1332 |
No mapping between account names and security IDs was done. |
1333 |
Too many LUIDs were requested at one time. |
1334 |
No more LUIDs are available. |
1335 |
The sub-authority part of a security identifier is invalid for this particular use. |
1336 |
The access control list (ACL) structure is invalid. |
1337 |
The security identifier structure is invalid. |
1338 |
The security descriptor structure is invalid. |
1340 |
The inherited access control list (ACL) or access control entry (ACE) could not be built. |
1341 |
The server is currently disabled. |
1342 |
The server is currently enabled. |
1343 |
The value provided was an invalid value for an identifier authority. |
1344 |
No more memory is available for security information updates. |
1345 |
The specified attributes are invalid, or incompatible with the attributes for the group as a whole. |
1346 |
Either a required impersonation level was not provided, or the provided impersonation level is invalid. |
1347 |
Cannot open an anonymous level security token. |
1348 |
The validation information class requested was invalid. |
1349 |
The type of the token is inappropriate for its attempted use. |
1350 |
Unable to perform a security operation on an object that has no associated security. |
1351 |
Indicates that a Windows NT Server could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved. |
1352 |
The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation. |
1353 |
The domain was in the wrong state to perform the security operation. |
1354 |
This operation is only allowed for the Primary Domain Controller (PDC) of the domain. |
1355 |
The specified domain did not exist. |
1356 |
The specified domain already exists. |
1357 |
An attempt was made to exceed the limit on the number of domains per server. |
1358 |
Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk. |
1359 |
The security account database contains an internal inconsistency. |
1360 |
Generic access types were contained in an access mask that should already be mapped to non-generic types. |
1361 |
A security descriptor is not in the right format (absolute or self-relative). |
1362 |
The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process. |
1363 |
Cannot start a new logon session with an identifier that is already in use. |
1364 |
A specified authentication package is unknown. |
1365 |
The logon session is not in a state that is consistent with the requested operation. |
1366 |
The logon session identifier is already in use. |
1367 |
A logon request contained an invalid logon type value. |
1368 |
Unable to impersonate using a named pipe until data has been read from that pipe. |
1369 |
The transaction state of a registry sub-tree is incompatible with the requested operation. |
1370 |
An internal security database corruption has been encountered. |
1371 |
Cannot perform this operation on built-in accounts. |
1372 |
Cannot perform this operation on this built-in special group. |
1373 |
Cannot perform this operation on this built-in special user. |
1374 |
The user cannot be removed from a group because the group is currently the user's primary group. |
1375 |
The token is already in use as a primary token. |
1376 |
The specified local group does not exist. |
1377 |
The specified account name is not a member of the local group. |
1378 |
The specified account name is already a member of the local group. |
1379 |
The specified local group already exists. |
1380 |
Logon failure-the user has not been granted the requested logon type at this computer. |
1381 |
The maximum number of secrets that may be stored in a single system has been exceeded. |
1382 |
The length of a secret exceeds the maximum length allowed. |
1383 |
The local security authority database contains an internal inconsistency. |
1384 |
During a logon attempt, the user's security context accumulated too many security IDs. |
1385 |
Logon failure-the user has not been granted the requested logon type at this computer. |
1386 |
A cross-encrypted password is necessary to change a user password. |
1387 |
A new member could not be added to a local group because the member does not exist. |
1388 |
A new member could not be added to a local group because the member has the wrong account type. |
1389 |
Too many security IDs have been specified. |
1390 |
A cross-encrypted password is necessary to change this user password. |
1391 |
Indicates an ACL contains no inheritable components. |
1392 |
The file or directory is corrupted and non-readable. |
1393 |
The disk structure is corrupted and non-readable. |
1394 |
There is no user session key for the specified logon session. |
1395 |
The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept. |
1400 |
Invalid window handle. |
1401 |
Invalid menu handle. |
1402 |
Invalid cursor handle. |
1403 |
Invalid accelerator table handle. |
1404 |
Invalid hook handle. |
1405 |
Invalid handle to a multiple-window position structure. |
1406 |
Cannot create a top-level child window. |
1407 |
Cannot find window class. |
1408 |
Invalid window, it belongs to another thread. |
1409 |
Hot key is already registered. |
1410 |
Class already exists. |
1411 |
Class does not exist. |
1412 |
Class still has open windows. |
1413 |
Invalid index. |
1414 |
Invalid icon handle. |
1415 |
Using private DIALOG window words. |
1416 |
The list box identifier was not found. |
1417 |
No wild-cards were found. |
1418 |
Thread does not have a clipboard open. |
1419 |
Hot key is not registered. |
1420 |
The window is not a valid dialog window. |
1421 |
Control identifier not found. |
1422 |
Invalid message for a combo box because it does not have an edit control. |
1423 |
The window is not a combo box. |
1424 |
Height must be less than 256. |
1425 |
Invalid device context (DC) handle. |
1426 |
Invalid hook procedure type. |
1427 |
Invalid hook procedure. |
1428 |
Cannot set non-local hook without a module handle. |
1429 |
This hook procedure can only be set globally. |
1430 |
The journal hook procedure is already installed. |
1431 |
The hook procedure is not installed. |
1432 |
Invalid message for single-selection list box. |
1434 |
This list box does not support tab stops. |
1435 |
Cannot destroy object created by another thread. |
1436 |
Child windows cannot have menus. |
1437 |
The window does not have a system menu. |
1438 |
Invalid message box style. |
1439 |
Invalid system-wide (SPI_*) parameter. |
1440 |
Screen already locked. |
1441 |
All handles to windows in a multiple-window position structure must have the same parent. |
1442 |
The window is not a child window. |
1443 |
Invalid GW_* command. |
1444 |
Invalid thread identifier. |
1445 |
Cannot process a message from a window that is not a multiple-document interface (MDI) window. |
1446 |
Pop-up menu already active. |
1447 |
The window does not have scroll bars. |
1448 |
Scroll bar range cannot be greater than 0x7FFF. |
1449 |
Cannot show or remove the window in the way specified. |
1450 |
Insufficient system resources exist to complete the requested service. |
1451 |
Insufficient system resources exist to complete the requested service. |
1452 |
Insufficient system resources exist to complete the requested service. |
1453 |
Insufficient quota to complete the requested service. |
1454 |
Insufficient quota to complete the requested service. |
1455 |
The paging file is too small for this operation to complete. |
1456 |
A menu item was not found. |
1457 |
Invalid keyboard layout handle. |
1458 |
Hook type not allowed. |
1459 |
This operation requires an interactive window station. |
1460 |
This operation returned because the time-out period expired. |
1500 |
The event log file is corrupted. |
1501 |
No event log file could be opened, so the event logging service did not start. |
1502 |
The event log file is full. |
1503 |
The event log file has changed between read operations. |
1700 |
The string binding is invalid. |
1701 |
The binding handle is not the correct type. |
1702 |
The binding handle is invalid. |
1703 |
The RPC protocol sequence is not supported. |
1704 |
The RPC protocol sequence is invalid. |
1705 |
The string universal unique identifier (UUID) is invalid. |
1706 |
The endpoint format is invalid. |
1707 |
The network address is invalid. |
1708 |
No endpoint was found. |
1709 |
The time-out value is invalid. |
1710 |
The object universal unique identifier (UUID) was not found. |
1711 |
The object universally unique identifier (UUID) has already been registered. |
1712 |
The type UUID has already been registered. |
1713 |
The remote procedure call (RPC) server is already listening. |
1714 |
No protocol sequences have been registered. |
1715 |
The RPC server is not listening. |
1716 |
The manager type is unknown. |
1717 |
The interface is unknown. |
1718 |
There are no bindings. |
1719 |
There are no protocol sequences. |
1720 |
The endpoint cannot be created. |
1721 |
Not enough resources are available to complete this operation. |
1722 |
The RPC server is unavailable. |
1723 |
The RPC server is too busy to complete this operation. |
1724 |
The network options are invalid. |
1725 |
There is not a remote procedure call active in this thread. |
1726 |
The remote procedure call failed. |
1727 |
The remote procedure call failed and did not execute. |
1728 |
A remote procedure call (RPC) protocol error occurred. |
1730 |
The transfer syntax is not supported by the RPC server. |
1732 |
The universal unique identifier (UUID) type is not supported. |
1733 |
The tag is invalid. |
1734 |
The array bounds are invalid. |
1735 |
The binding does not contain an entry name. |
1736 |
The name syntax is invalid. |
1737 |
The name syntax is not supported. |
1739 |
No network address is available to use to construct a universal unique identifier (UUID). |
1740 |
The endpoint is a duplicate. |
1741 |
The authentication type is unknown. |
1742 |
The maximum number of calls is too small. |
1743 |
The string is too long. |
1744 |
The RPC protocol sequence was not found. |
1745 |
The procedure number is out of range. |
1746 |
The binding does not contain any authentication information. |
1747 |
The authentication service is unknown. |
1748 |
The authentication level is unknown. |
1749 |
The security context is invalid. |
1750 |
The authorization service is unknown. |
1751 |
The entry is invalid. |
1752 |
The server endpoint cannot perform the operation. |
1753 |
There are no more endpoints available from the endpoint mapper. |
1754 |
No interfaces have been exported. |
1755 |
The entry name is incomplete. |
1756 |
The version option is invalid. |
1757 |
There are no more members. |
1758 |
There is nothing to un-export. |
1759 |
The interface was not found. |
1760 |
The entry already exists. |
1761 |
The entry is not found. |
1762 |
The name service is unavailable. |
1763 |
The network address family is invalid. |
1764 |
The requested operation is not supported. |
1765 |
No security context is available to allow impersonation. |
1766 |
An internal error occurred in a remote procedure call (RPC). |
1767 |
The RPC server attempted an integer division by zero. |
1768 |
An addressing error occurred in the RPC server. |
1769 |
A floating-point operation at the RPC server caused a division by zero. |
1770 |
A floating-point underflow occurred at the RPC server. |
1771 |
A floating-point overflow occurred at the RPC server. |
1772 |
The list of RPC servers available for the binding of auto handles has been exhausted. |
1773 |
Unable to open the character translation table file. |
1774 |
The file containing the character translation table has fewer than 512 bytes. |
1775 |
A null context handle was passed from the client to the host during a remote procedure call. |
1777 |
The context handle changed during a remote procedure call. |
1778 |
The binding handles passed to a remote procedure call do not match. |
1779 |
The stub is unable to get the remote procedure call handle. |
1780 |
A null reference pointer was passed to the stub. |
1781 |
The enumeration value is out of range. |
1782 |
The byte count is too small. |
1783 |
The stub received bad data. |
1784 |
The supplied user buffer is not valid for the requested operation. |
1785 |
The disk media is not recognized. It may not be formatted. |
1786 |
The workstation does not have a trust secret. |
1787 |
The SAM database on the Windows NT Server does not have a computer account for this workstation trust relationship. |
1788 |
The trust relationship between the primary domain and the trusted domain failed. |
1789 |
The trust relationship between this workstation and the primary domain failed. |
1790 |
The network logon failed. |
1791 |
A remote procedure call is already in progress for this thread. |
1792 |
An attempt was made to logon, but the network logon service was not started. |
1793 |
The user's account has expired. |
1794 |
The re-director is in use and cannot be unloaded. |
1795 |
The specified printer driver is already installed. |
1796 |
The specified port is unknown. |
1797 |
The printer driver is unknown. |
1798 |
The print processor is unknown. |
1799 |
The specified separator file is invalid. |
1800 |
The specified priority is invalid. |
1801 |
The printer name is invalid. |
1802 |
The printer already exists. |
1803 |
The printer command is invalid. |
1804 |
The specified data type is invalid. |
1805 |
The environment specified is invalid. |
1806 |
There are no more bindings. |
1807 |
The account used is an inter-domain trust account. Use your global user account or local user account to access this server. |
1808 |
The account used is a computer account. Use your global user account or local user account to access this server. |
1809 |
The account used is a server trust account. Use your global user account or local user account to access this server. |
1810 |
The name or security identifier (SID) of the domain specified is inconsistent with the trust information for that domain. |
1811 |
The server is in use and cannot be unloaded. |
1812 |
The specified image file did not contain a resource section. |
1813 |
The specified resource type cannot be found in the image file. |
1814 |
The specified resource name cannot be found in the image file. |
1815 |
The specified resource language identifier cannot be found in the image file. |
1816 |
Not enough quota is available to process this command. |
1817 |
No interfaces have been registered. |
1818 |
The server was altered while processing this call. |
1819 |
The binding handle does not contain all required information. |
1820 |
Communications failure. |
1821 |
The requested authentication level is not supported. |
1822 |
No principal name registered. |
1823 |
The error specified is not a valid Windows NT RPC error value. |
1824 |
A UUID that is valid only on this computer has been allocated. |
1825 |
A security package specific error occurred. |
1826 |
Thread is not canceled. |
1827 |
Invalid operation on the encoding/decoding handle. |
1828 |
Incompatible version of the serializing package. |
1829 |
Incompatible version of the RPC stub. |
1830 |
The idl pipe object is invalid or corrupted. |
1831 |
The operation is invalid for a given idl pipe object. |
1832 |
The Interface Definition Language (IDL) pipe version is not supported. |
1898 |
The group member was not found. |
1899 |
The endpoint mapper database could not be created. |
1900 |
The object UUID is the nil UUID. |
1901 |
The specified time is invalid. |
1902 |
The specified form name is invalid. |
1903 |
The specified form size is invalid. |
1904 |
The specified printer handle is already being waited on |
1905 |
The specified printer has been deleted. |
1906 |
The state of the printer is invalid. |
1907 |
The user must change his password before he logs on the first time. |
1908 |
Could not find the domain controller for this domain. |
1909 |
The referenced account is currently locked out and may not be logged on to. |
1910 |
The object exporter specified was not found. |
1911 |
The object specified was not found. |
1912 |
The object resolver set specified was not found. |
1913 |
Some data remains to be sent in the request buffer. |
2000 |
The pixel format is invalid. |
2001 |
The specified driver is invalid. |
2002 |
The window style or class attribute is invalid for this operation. |
2003 |
The requested meta-file operation is not supported. |
2004 |
The requested transformation operation is not supported. |
2005 |
The requested clipping operation is not supported. |
2202 |
The specified user name is invalid. |
2250 |
This network connection does not exist. |
2401 |
This network connection has files open or requests pending. |
2402 |
Active connections still exist. |
2404 |
The device is in use by an active process and cannot be disconnected. |
3000 |
The specified print monitor is unknown. |
3001 |
The specified printer driver is currently in use. |
3002 |
The spool file was not found. |
3003 |
A StartDocPrinter call was not issued. |
3004 |
An AddJob call was not issued. |
3005 |
The specified print processor has already been installed. |
3006 |
The specified print monitor has already been installed. |
3007 |
The specified print monitor does not have the required functions. |
3008 |
The specified print monitor is currently in use. |
3009 |
The requested operation is not allowed when there are jobs queued to the printer. |
3010 |
The requested operation is successful. Changes will not be effective until the system is rebooted. |
3011 |
The requested operation is successful. Changes will not be effective until the service is restarted. |
4000 |
WINS encountered an error while processing the command. |
4001 |
The local WINS can not be deleted. |
4002 |
The importation from the file failed. |
4003 |
The backup failed. Was a full backup done before? |
4004 |
The backup failed. Check the directory to which you are backing the database. |
4005 |
The name does not exist in the WINS database. |
4006 |
Replication with a non-configured partner is not allowed. |
6099 |
Your analysis has exceeded computational abilities. |
6100 |
You are trying to set an integer control variable outside the range 32,675 to -32,676. |
6101 |
An integer is expected, but something else has been found. Are there person, item or category numbers in your deletion and anchor files? |
6103 |
A number is expected, but something else has been found. Are your anchor values specified correctly? |
6104 |
Your analysis has exceeded computational abilities. |
6118 |
The list of servers for this work-group is not currently available. |
6209 |
You assigned two files with the same name. |
6311 |
You are trying to process more than 32,676 elements. |
6405 |
End of file has been reached unexpectedly. |
6405 |
See -1 above. |
6413 |
You have specified two different files with the same name, e.g. your output file and your IFILE= must have different names. |
6414 |
You tried to access a protected file or a directory index. |
6416 |
An input file cannot be found, or an output file cannot be written. |
6417 |
DOS needs a larger file area. Increase the number in your FILES= statement in your CONFIG.SYS file. |
6421 |
You tried to write to a read-only or locked file. In WINDOWS, does another program still have your file open? |
6422 |
You've run out of disk space |
6501 |
End of file has been reached unexpectedly. |
6700 |
Your analysis requires more RAM memory |
FORTRAN Error Codes: |
|
10000 |
File not open for read. |
10001 |
File not open for write. |
10002 |
File not found. |
10003 |
Record length negative or 0. |
10004 |
Buffer allocation failed. |
10005 |
Bad iolist specifier. |
10006 |
Error in format string. |
10007 |
Illegal repeat count. |
10008 |
Hollerith count exceeds remaining format string. |
10009 |
Format string missing opening "(". |
10010 |
Format string has unmatched parentheses. |
10011 |
Format string has unmatched quotes. |
10012 |
Non-repeatable format descriptor. |
10013 |
Attempt to read past end of file. |
10014 |
Bad file specification. |
10015 |
Format group table overflow. |
10016 |
Illegal character in numeric input. |
10017 |
No record specified for direct access. |
10018 |
Maximum record number exceeded. |
10019 |
Illegal file type for namelist directed I/O. |
10020 |
Illegal input for namelist directed I/O. |
10021 |
Variable not present in current namelist. |
10022 |
Variable type or size does not match edit descriptor. |
10023 |
Illegal direct access record number. |
10024 |
Illegal use of internal file. |
10025 |
RECL= only valid for direct access files. |
10026 |
BLOCK= only valid for un formatted sequential files. |
10027 |
Unable to truncate file after rewind, backspace, or endfile. |
10028 |
Can't do formatted 1/0 on an entire structure. |
10029 |
Illegal (negative) unit specified. |
10030 |
Specifications in re-open do not match previous open. |
10031 |
No implicit OPEN for direct access files. |
10032 |
Cannot open an existing file with STATUS='NEW'. |
10033 |
Command not allowed for unit type. |
10034 |
MRWE is required for that feature. |
10035 |
Bad specification for window. |
10036 |
Endian specifier not BIG_ENDIAN or LITTLE_ENDIAN. |
10037 |
Cannot ENDIAN convert entire structures. |
10038 |
Attempt to read past end of record. |
10039 |
Attempt to read past end of record in non-advancing I/O. |
10040 |
Illegal specifier for ADVANCE=. |
10041 |
Illegal specifier for DELIM=. |
10042 |
Illegal specifier for PAD=. |
10043 |
SIZE= specified with ADVANCE=YES. |
10044 |
EOR= specified with ADVANCE=YES. |
10045 |
Cannot DEALLOCATE disassociated pointer or unallocated array. |
10046 |
Cannot DEALLOCATE a portion of an original allocation. |
10047 |
An allocatable array has already been allocated. |
10048 |
Internal or unknown runtime library error. |
10049 |
Unknown data type passed to runtime library. |
10050 |
Illegal DIM argument to array intrinsic. |
10051 |
Size of SOURCE argument to RESHAPE smaller than SHAPE array. |
10052 |
SHAPE array for RESHAPE contains a negative value. |
10053 |
Unallocated or disassociated array passed to inquiry function. |
10054 |
The ncopies argument to REPEAT is negative. |
10055 |
The S argument to NEAREST is negative. |
10056 |
The ORDER argument to RESHARE contains an illegal value. |
10057 |
Result of TRANSFER with no SIZE is smaller than source. |
10058 |
SHAPE array for RESHAPE is zero sized array. |
10059 |
VECTOR argument to UNPACK contains insufficient values. |
10060 |
Attempt to write a record longer than specified record length. |
10061 |
ADVANCE= specified for direct access or un formatted file. |
10062 |
NAMELIST name is longer than specified record length. |
10063 |
NAMELIST variable name exceeds maximum length. |
10064 |
PAD= specified for un formatted file. |
10065 |
NAMELIST input contains multiple strided arrays. |
10066 |
Expected & or $ as first character for NAMELIST input. |
10067 |
NAMELIST group does not match current input group. |
10068 |
Pointer or allocatable array not associated or allocated. |
10069 |
NAMELIST input contains negative array stride. |
10070 |
Runtime memory allocation fails. |
FORMAT= Error Codes: |
|
6205 |
A edit descriptor problem, e.g. ZA instead of 2A or l for 1, or O for 0 |
6502 |
Repeat field not a positive integer, e.g. 7.3A1 instead of 7A1 |
6503 |
Multiple repeat field, e.g. 2*3 instead of 6 |
6504 |
Invalid number, e.g. 7D mistyped for 70 |
6980 |
Invalid integer, e.g. 2Z mistyped for 22. Integers must be in the range -2147483648 to 2147483647 |
6981 |
Initial left parenthesis expected. FORMAT= must start with ( |
6982 |
Positive integer required, e.g. 0X is not allowed. |
6983 |
Invalid repeat count, e.g 3T22 is not allowed, only T22 |
6984 |
An integer must precede X, e.g. X is not allowed, use 1X |
6985 |
B must be followed by N or Z |
6986 |
Parentheses () can go no more than 16 levels deep. |
6987 |
F,D,E,G fields must contain a . e.g. F6 instead of F6.0 |
6988 |
Not enough ) in format. |
6989 |
Unknown or missing character in format, e.g. two commas together: ,, |
6990 |
Too many leading zeroes specified in I format, e.g. I6.7 instead of I6.6 |
6991 |
Numerical value greater than 32766 in FORMAT= statement. |
